Uncover The Best Leveling Kits For Silverado | 07 Best Silverado Leveling Kit Reviews
The Silverado is one of those trucks built for heavy-duty use. As such, one may ask, “Why do I need leveling kit in my Silverado?”
The truth about leveling kits is that they are best used if you only want to lift the front end of your truck to match the height of the back. If you will observe closely, the back of the trucks
Though the design is practical, it is not necessary. Most especially so if you are not doing any heavy farming work. If you raise the front end suspensions and level your truck, you are adding more ground clearance. This means that the front of your truck will not snag on road humps.
Which are the best leveling kit silverdo ?
ince you may come across several Silverado leveling kit problems, we have put together a list that will help you determine the best leveling kit for Silverado.
This is a leveling kit for Silverado and it will yield at least two inches of lift. The kit includes hardware and lower strut mount extensions. One of the good things to expect from this product is that it maintains the ride quality after installation, like as if the leveling was done in the manufacturer’s casa.
You need to buy this if your intent is to increase your truck’s ground clearance and if you are satisfied with only leveling the front with the back. It works with all OEM control arms and you do not need to go through disassembling your struts.
In our experience, this kit works best if you check the alignment before installation. Although many people will claim that it will only take three hours to install, it took us about four hours. It is also best to have two people do the job. You may have a tough time aligning the holes on the spacer but this will come through. To make your job easier, use an Allen wrench or hex key on the ball joint.
The kit comes with instructions so make sure you read that. You can also watch on YouTube for some installation techniques.
- Simple bolt-on installation
- Fast installation between 3 to 4 hours
- Provides up to 2.6 inches of lift
- Lightweight at 1.75 pounds
- Fits more than a dozen models
- Not compatible with 2014-2016 GMC Denali models
- Not fit for 2007 GMC models
This one is heavier than the 1307. It weighs roughly 16 pounds and has more components. If you are looking for the best leveling kit for Silverado, try this if it is the appropriate one for your truck model. It works for 2007 to 2018 Silverado models for both 1500 two-wheel and four-wheel drive models. It also fits 2007 to 2017 models of GMC Sierra.
Upon purchase, you will receive lower strut mount extensions for the front, the necessary hardware and strut spacers for the front, and the rear components comprised of 2-inch lift block and U-bolts. It also comes with an instruction manual. Read it first and if you find yourself unsure, take your truck to a mechanic.
Like the 1307 model, this is highly recommended and we can say that this is the best leveling kit for
The fabricated blocks guarantees longer life span than cast ones. In our experience, we also know that fabricated blocks such as these are better equipped to take environmental damage.
- Easy installation with bolt-on
- Longer life span of fabricated blocks
- Can provide clearance for 285/70 R17 tires
- Up to 2.5 inches of lift
- No disassembly needed for struts
- Does not work with cast aluminum control arms models
- Does not fit auto leveling models
3. MotoFab Lifts-CH-3F-2R 3″ Front-and-2″ Rear-Leveling lift-kit for 2007-2017 Chevy-Silverado Sierra-GMC
This is a double purpose of best leveling kit Silverado. Apart from raising the front for three inches, this kit comes with components that will raise the rear by at least two inches. Like the first two kits we reviewed, this does not require disassembly of the strut. This one is best used by people who not only want to increase front ground but the back, too. This provides the necessary height in areas that easily get flooded.
This is the best Silverado leveling kit for 2007 to 2018 Chevrolet trucks. This also perfectly fits GM 1500 of the same year series.
MotoFab is known for its
We also realized that this is a straightforward installation because of the direct fit design. There is no need to cut or drill holes. It also fits models as early as 2004. When we installed it, it only took as a couple of hours to complete the job. Some people may take more than that.
One of the good things that you can get from this product is the pair of strut spacers. These are extremely durable and can tough it out on any weather or terrain condition.
- Takes only three hours to install.
- Has a lifetime warranty.
- Build matches factory suspension.
- Increases ground clearance on both rear and front.
- Has longer U-bolts for
- Heavy a5 21 pounds.
- Thickness of lift spacer is not 1:1 ratio
4. MotoFab-Lifts CH-2.5-2.5″ Front-Leveling Lift-Kit That-Will-Raise-the-Front-of-Your-Chevy/GMC-Pickup 2.5″
Just like the previous MotoFab, this one improves the ground clearance of your truck, albeit you only get a kit for the front. This is a pair of round kit.
This is the best leveling kit for 2015 Silverado. We tried it ourselves and we were impressed with what we saw. It took us only an hour and a half to install because there is no need to remove and disassemble our truck’s coil and strut.
It is one of the strongest kits out there. MotoFab is known for delivering sturdy products because of CNC machining. This is why there is a lifetime limited warranty on the product. The kit is black and it is made of billeted aluminum. It is also powder coated.
Apart from the 2015 model, this kit will fit 2007 to 2016 models of Silverado. You can also use this to increase the ground clearance of your Sierra 2WD or 4WD.
We do not recommend this for later versions because it does not fit. You are better off buying a 2018 Silverado leveling kit if you have a newer model. We also advise that this
- Easy installation.
- No drilling required.
- No disassembly needed.
- 100% durable with the backing of lifetime warranty.
- Comes with instructions for installation.
- Does not work for 2017 and newer models.
- Can result to high-speed wobble.
5. MotoFab Lifts-CH-2LM – 2″ Front-Leveling Lift-Kit That-Will-Raise-the-Front-of-Your Chevy/GMC-Pickup 2″
We have read many leveling kit reviews for Silverado. This kit serves the same function but it is not round. It is rectangular and comes with four bolts and nuts. The package includes eight O-rings that you can use for that extra tightness. This model is only appropriate for use for the front of your truck.
It best fits 2007 to 2018 models of Chevrolet and 1500 pickup trucks by General Motors. One thing we cannot help but praise is the detailed instruction. As we go along and test these kits, we also only took a little less than an hour and a half to complete the installation. In fact, we could have installed it 20 minutes sooner had it not been for some stubborn ball joints that we could not release.
This kit is designed in a way that you do not have to disassemble your coil and strut. You do not even have to remove the steering linkage. After the installation, we can say that this product provides a true two-inch lift.
- Installation can be done in one to one and a half hours
- Hardcore quality; one of the most durable in the market
- 100% lifetime limited warranty
- Fits most models
- Provides true two inches of lift
- Bolts are grade 5, not grade 8 as advertised
- Does not work well with stamped steel control arms
Armed with free shipping and a mission to find the best leveling kit for Silverado, we tried this product to see how it stacks up with the others.
This one is touted as compatible with 2007 new body style Silverado and models from 2008 to 2018. It is also advertised as one that fits GMC Sierra 1500 on both two- and four-wheel drive models. So far, we have not heard anyone complain that it does not fit. But we did a testing of our own.
The material used is 6061-T6 aircraft-grade aluminum billet, complete with heat treatment to make it more durable. As such, you have the peace of mind that this product is tough.
The bolts are 10.9 grade which complements the kit, and there is an added feature of anodized surface. So instead of just using powdered coating, this manufacturer decided to step it up a little with anodization. This process improves a metal’s resistance to corrosion. It will improve the product’s longevity and fight rust.
- Easy installation
- True 2.5 inches of lift
- Maintains OEM ride quality
- High grade bolts
- High grade material
- No instruction manual
- There are no proper-sized washers
7. MotoFab-Lifts CH-3F-1R 3″ Front-and-1″ Rear-Leveling lift-kit for 2007-2019 Chevy-Silverado Sierra-GMC
If you are looking for a true 3 inch leveling kit for Silverado, look no further. This product delivers what it is supposed to. We tested this in our garage and we are happy with the results.
Like most MotoFab products, this is made of CNC equipment machining process. The aluminum billets were shaped precisely for easy installation. The fitting process does not need disassembly or any kind of modification. No drilling and no metal fabrication is required.
This best fits models from 2007-2018 for Chevrolet. It also fits most 1500 GM trucks. We tested this on a 2015 4X4 and it sat our truck level. Our truck is running on a 305/55/20 and we did not feel any rubbing at all. This is great to increase your truck’s front clearance, especially if you are driving through creeks and rugger terrains. We tested the truck in his condition but the ride quality is not the same.
This levelling kit requires at least two people to install. If not, you need an experienced mechanic who can do the job for you. Although the U-bolt may not exactly fit, your mechanic will know what to do so you do not have to spend more money on buying new ones. A new set of bolts can cost you $80.
In some cases, you may need re-alignment after installation.
- High grade material
- Lifetime warranty
- Works for front and rear leveling
- No disassembly required
- Has stiffer ride than stock
- U-bolt may not fit
There goes our top levelling kits for Silverado. Surely, there are more manufacturers out there but these are the best that we have tested. Though there was no perfect product, we can say that the ones we just reviewed have acceptable flaws that area easy to mitigate. So far, none of these will take more than four hours of installation, provided that it is done by someone with at least a little knowledge about car mechanics.
The best part? The warranties are between two years to a lifetime. This is indicative of how the manufacturer trusts the quality of the products. Based on this review, choose the best one that you can use for your Silverado. Do not forget our input on which models we tried the
Related articles for you: